Group Delay Equalized UWB InGaP/GaAs HBT MMIC Amplifier Using Negative Group Delay Circuits

A negative group delay (NGD) circuit has been employed to equalize a group delay variation in a broadband ultra-wideband (UWB) InGaP/GaAs heterojunction bipolar transistor (HBT) monolithic microwave integrated circuit (MMIC) amplifier. Using the NGD circuit, a part of a salient group delay characteristic in the operation band of broadband amplifiers can be suppressed without an increase of the entire group delay. The MMIC amplifier has a steep group delay increase in the lower frequency region of the full-band UWB band (3.1-10.6 GHz) due to the sum of phase variations near the cutoff frequencies of the HBTs. The NGD circuit has been inserted to reduce this increase of the group delay in the UWB band. By adding a three-cell NGD circuit while considering input and output matching at the input side of the MMIC amplifier, the group delay variation is decreased by 78%. However, gain was also decreased by insertion of the multistage NGD circuit. In an attempt to avoid this decrease in gain, a one-cell NGD circuit was inserted into the feedback loop of the MMIC amplifier, and as a result, we were able to decrease the group delay variation by 79%, with minimal gain deterioration.