A Low-Power SRAM Using Bit-Line Charge-Recycling

Low-power SRAM design is crucial since it takes a large fraction of total power and die area in high-performance processors. Reducing voltage swing of the bit-line is an effective way to save the power dissipation in write cycles. Voltage swing reduction of bit-lines is, however, limited due to possible write-failures. We propose a new low-power SRAM using bit-line charge recycling (CR-SRAM) for the write operation. In the proposed write scheme, differential voltage swing of a bit-line is obtained by recycled charge from its adjacent bit-line capacitance, instead of the power line. Applying such a charge recycling technique to the bit-line significantly reduces write power. A test chip with 32 Kbits (256 rows x 128 columns) is fabricated and measured in 0.13 mum CMOS to demonstrate operation of the proposed SRAM. Measurement results show 88% reduction in total power during write cycles compared to the conventional SRAM (CON-SRAM) at V
_DD
= 1.5 V and f = 100 MHz.