Timing improvement by low-pass filtering and linear interpolation for the LabPETTM scanner

Digital processing for positron emission tomography (PET) scanners commonly relies on low frequency sampling (≪65 MHz) for reducing power consumption. Timestamps must then be interpolated between samples to achieve adequate time resolution for coincidence detection of annihilation radiation. A low-pass filter based interpolation algorithm adding up to 31 samples between original samples was designed to improve both the energy and timing resolution of the LabPET
^TM
scanner. An energy resolution refinement of ˜2 bits can be achieved with such a technique. The better estimation of triggering threshold leads to a more accurate timestamp generation. Timestamp accuracy was investigated as a function of trigger level (5-50% of maximum value). With the trigger threshold set at 20%, coincidence time resolution of ˜5.0 ns for LYSO-LYSO and ˜9.6 ns for LGSO-LGSO are obtained. A real time implementation of the algorithm was achieved in a Xilinx FPGA.