Narrowband lumped-element microstrip filters using capacitively-loaded inductors

Coupling between microstrip resonators decreases very slowly as a function of the resonator separation. Therefore it is difficult to realize narrowband filters (e.g. <0.1% bandwidth) in microstrip form due to the very weak coupling values required. In this paper, we have developed a class of lumped-element filters that uses capacitively-loaded inductors to give frequency-dependent inductance values. A novel frequency-transformation technique is used in the design process. Using this approach, strong coupling can be used in narrowband filter designs. The frequency-dependent inductance transforms the filter to a narrower bandwidth than the original circuit prototype, and does not require hard-to-realize weak coupling. We present a 0.3% bandwidth superconducting microstrip prototype filter. It was designed with the coupling of a 1% bandwidth filter, and then transformed to 0.3% fractional bandwidth using an appropriate inductance slope parameter, dL/d/spl omega/. Measurement showed good agreement with theory.<
>