Characterization of the cell leakage of a stacked trench capacitor (STT) cell

The cell leakage of a stacked trench capacitor (STT) cell has been investigated. The major leakage mechanisms of the STT are trench-to-trench leakage, trench junction leakage, and LOCOS isolation leakage. It is shown that compared to a conventional trench capacitor, the trench-to-trench leakage current is reduced and high punchthrough voltage is obtained. Therefore, the trench-to-trench spacing can be reduced 0.1 /spl mu/m shorter than that of the trench capacitor. These reductions result from the STT structure itself. The surface leakage current, which is the dominant leakage current in the trench capacitor, does not flow in the STT. This paper also describes the effect of the sidewall damage caused by trench etching on the trench junction leakage. Reactive ion etching (RIE) produces deep levels just beneath the trench surface. But, the trench junction of the STT is not influenced by these deep levels because the trench surface is covered by a n/sup -/diffused layer. This paper also investigates the relationship between the cell leakage and the retention time. At DRAM operation temperatures, LOCOS isolation leakage is dominant rather than trench junction leakage. Therefore, the deeper trench can increase the storage capacitance and improve the retention time.<
>