Random current testing for CMOS logic circuits by monitoring a dynamic power supply current

Assuming a stuck-at type fault, the authors discuss current testing for CMOS logic circuits where the random patterns generated by a linear feedback shift register (LFSR) are applied, and a dynamic power supply current is monitored. The LFSR is modified such that there exists a feedback from the outputs of a circuit under test to the LSFR. This modification is intended for amplifying the effect of a fault near a primary output on the dynamic current. In order to distinguish the dynamic current of a faulty circuit from the one of a fault-free circuit, two methods are discussed. One is the method where the waveform of the dynamic current is recognized using a neural network, and the other is the method where the mean dynamic current is calculated. Simulation results show that a high fault coverage can be obtained using a small number of test vectors.<
>