A complete 400-Mb/s burst-mode data OEIC receiver

A fully integrated burst-mode GaAs MESFET optoelectronic integrated circuit (OEIC) receiver, 215 mil*109 mil, that has been designed and implemented for point-to-point data links for application as a phased-array antenna controller is described. The chip provides a low-cost means for passing 400-Mb/s antenna control information using fiber optics with a very low bit-error rate (BER). Approximately 350 source-coupled FET logic gates are present on the chip. A new data coding and timing recovery scheme that is highly tolerant to jitter over a wide bandwidth has been developed. The OEIC uses an on-chip metal-semiconductor-metal (MSM) photodiode with 0.12-A/W responsivity measured at 780 nm and was fabricated in a 1.0-mm GaAs MESFET manufacturing technology. The low capacitance semi-insulating GaAs substrate minimizes the coupling between analog and digital circuitry. The circuit operates from a single 5-V supply, consumes 1 W of power, and provides an 8-b CMOS output bus together with various utility flags. Optical sensitivity is estimated at -20 dBm for 10/sup -14/ BER.<
>