Capacitance requirements of self-excited induction generators

A simple method for computing the minimum value of capacitance, C min. required for initiating voltage build-up in a three-phase self-excited induction generator (SEIG) is presented. Based on the steady-state equivalent circuit model, a consideration of the circuit conductances yields a sixth-degree polynomial in the per-unit frequency. The polynomial can be solved for real roots, which enables the value of C/sub min/ to be calculated. Critical values of load impedance and speed, below which the machine fails to self-excite irrespective of the capacitance used, are found to exist. Closed form solutions for C/sub min/ are derived for no-load and inductive loads. Using the same numerical approach, an interative procedure is developed for predicting the capacitance required for maintaining the terminal voltage at a preset value when the generator is supplying load. Experimental results obtained on a 2 kW induction machine confirm the feasibility and accuracy of the proposed methods.<
>