Fiber-coupled short Fabry-Perot resonators

An air-gap Fabry-Perot resonator with plane mirrors between closely spaced fiber ends may yield low throughput because of the poor match between the modes of typical single-mode fibers and the resonant mode in the air-gap cavity. The throughput can be improved by confining the resonant mode by a hollow dielectric tube placed inside the resonator. Short fiber-coupled Fabry-Perot resonators with and without an inserted hollow dielectric waveguide and expressions for their transmission losses are derived. It is shown that the throughput of both types of resonator can be improved significantly by using fiber with large mode size to couple to the resonator. The special fiber is then spliced to a conventional single-mode fiber. It is concluded that the resonator with an inserted hollow dielectric waveguide offers increased throughput for resonators with high finesse.<
>