Wire scanners at LEP

Two sets of wire scanners, each for measuring the horizontal and vertical profile, are installed in LEP in a straight section where the dispersion in both planes is zero. The authors present the design and discuss some limitations of the instrument. A carbon fiber with a diameter of 36 mu m moves through the beam with a speed of about 0.5 m/s. The bremsstrahlung photons generated by the passage of the wire through the beam are detected in scintillators located 80-m downstream. During the first months of LEP operation, the fibers were destroyed occasionally. The various causes, tests and remedies are discussed. At injection energy a significant blowup of the beam results from the wire scan and has to be taken into account for the estimation of the genuine emittance. A model of this blowup is proposed, where the effect is renormalized on the actual measured data. This provides an effective data treatment to obtain the unperturbed beam size.<
>