Mechanical Shear Wave Induced by Piezoelectric Ceramics for Magnetic Resonance Elastography

Magnetic resonance elastography (MRE) is a noninvasive technique to measure elasticity of tissues in vivo. For MRE, an additional actuator is needed to be mounted on an observed object, and to excite the object. In this paper, an experiment is set to obtain MR mechanical shear wave images. A novel actuator is proposed to generate mechanical wave propagating inside a gel phantom. The actuator is made of piezoelectric ceramics, and is fixed on a plexiglass bracket. Both of the gel phantom and the actuator are put into a head coil in the scanner's bore. The actuator works synchronously with an imaging sequence running on the scanner. The sequence is modified from a FLASH sequence, into a motion-sensitizing phase-contrast sequence, for shear wave imaging. Wave images are presented to show the effect of those factors, such as the stiffness of the phantoms, the frequency of the actuator, the parameters of the motion-sensitizing gradient, and the oscillation of the patient bed