Factors influencing timing resolution in a commercial LSO PET camera

The CPS Accel is a commercial PET camera based on a block detector with 64 LSO scintillator crystals (each 6.75/spl times/6.75/spl times/25 mm) read out with 4 photomultiplier tubes. The excellent timing resolution of LSO suggests that this camera might be used for time-of-flight (TOF) PET, thereby reducing the statistical noise significantly. Although the Accel achieves 3 ns coincidence resolution (a factor of two better than BGO-based PET cameras), its timing resolution is nearly an order of magnitude worse than that demonstrated with individual LSO crystals. This paper quantifies the effect on the timing of each component in the Accel timing chain to identify which components most limit the camera's timing resolution. The components in the timing chain are: the scintillator crystal, the photomultiplier tube (PMT), the constant fraction discriminator (CFD), and the time to digital converter (TDC). To measure the contribution of each component, we construct a single crystal test system with high-performance versions of these components. This system achieves 221 ps FWHM coincidence timing resolution, which is used as a baseline measurement. One of the high-performance components is replaced by a production component, the coincidence timing resolution is re-measured, and the difference between measurements is the contribution of that (production) component. We find that the contributions of the TDC, CFD, PMT, and scintillator are 2000 ps, 1354 ps, 422 ps, and 326 ps FWHM, respectively, and that the overall timing resolution scales like the square root of the amount of scintillation light detected by the PMT. Based on these measurements we predict that the limit for the coincidence timing resolution in a practical, commercial, LSO-based PET camera is 528 ps FWHM.