An audio FIR-DAC in a BCD process for high power class-D amplifiers

A 322 coefficient semi-digital FIR-DAC using a 1-bit PWM input signal was designed and implemented in a high voltage, audio power bipolar CMOS DMOS (BCD) process. This facilitates digital input signals for an analog class-D amplifier in BCD. The FIR-DAC performance depends on the ISI-resistant nature of this PWM-signal. An impulse response with only positive coefficients was chosen, because of its resistance to deadzone and mismatch. With a DAC current of 0.5 mA, the dynamic range is 111 dB (A-weighted), with SINAD = 103 dB (A-weighted). The current consumption is 1mA for the analog part and 4.8 mA for the digital part. The power consumption is 29 mW at V/sub dd/ = 5 V and the chip area is 2 mm/sup 2/ including the reference diode that can be shared by more channels.