Modeling, simulation, and analysis of analog-to-digital converters for wireless communication [broadband satellite systems]

In modern satellite systems the uplink RF wideband signal after downconversion to IF is input to an ADC, which is a major limitation as it needs to operate at a rate at least 2/spl times/ the received signal bandwidth. In the case of a wideband signal comprised of many multiplexed signals, the spectral distribution of quantization noise is also of significant interest. Another very important consideration is the signal clipping effect occurring whenever the instantaneous input signal amplitude exceeds the maximum linear range of the quantizer. Since clipping cannot be avoided in most practical situations, the signal power to the quantization plus clipping noise power ratio is of utmost interest. Such a ratio is in general a function of the quantizer load factor that in turn is the ratio of the input signal average power to the maximum peak power at the quantizer output. This paper presents simulation results on the quantizer analysis when the input signal is comprised of a specified number of digitally modulated carriers. The results are obtained in terms of the probability of symbol error and the probability of bit error as a function of quantizer load factor.