High power planar interconnect for high frequency converters

This paper describes the P4/spl copy/ power process, structure and materials and provide performance and reliability test data. Power electronic device technologies have been making significant performance improvement over the past decade, similar to but perhaps not as breath taking as the changes made in digital microelectronics. Power device technology is going to higher voltage levels, higher current level and faster switching speed. The on-resistance, R/sub DS(on)/ in MOSFETs dropped by a factor of 3/spl times/ from 1997 to 2000 with improvements driven by "higher cell densities, shorter channels, thinner gate oxides and lower substrate resistance through lower resistivity materials and thinner wafers. Switching losses also have been reduced with narrower polysilicon lines and trenches and shallower junctions as stated in A. Lidow (for original article see APEC 2003) and A. Lidow (1999). Higher switching speeds are being realized in IGBTs by better control of the injection level and minority carrier lifetime. Finally, lower and better controlled VCE(on), have been achieve with higher density designs and self-aligning processes according to Al Lidow (2003). Diodes are delivering shorter reverse recovery times with less switching noise and faster soft recover with less overshoot and reduced EMI. Power electronics is also a growing industry with total power device sales of 43 billion devices ($ /spl sim/4 billion) in 1999 growing to 84 billion devices (/spl sim/ $8 billion) in 2004.