Medium-loss SAW filters with synthesized characteristics

Medium-loss surface acoustic wave (SAW) filters based on the in-line dot array structure are reported. This configuration is very amenable to device synthesis, potentially to specifications comparable to conventional high-loss designs. The design procedure fully allows for multiple reflections within the reflecting arrays and can handle chirps. The devices have achieved up to 0.2-dB RMS passband ripple and 32-dB rejection after direct coupling and multistrip coupler (MSC) reflection are removed. Passband loss (6-8 dB) could be reduced if transducer and MSC loss (3 dB) can be improved. The devices also have sharp cutoffs, and fairly uniform input and output impedances in the pass and transition bands. The reflectors chosen for the reflecting arrays are thin metal dots. The results of computation and experimental verification of dot reflectivity and velocity change for the particular size of dots and dot pattern used are given. The device design, and the measured results are discussed.<
>