What can wireless cellular technologies do about the upcoming smart metering traffic?

The introduction of smart electricity meters with cellular radio interfaces has placed an additional load on wireless cellular networks. Currently, these meters are designed for low duty cycle billing and occasional system check, which generates low-rate sporadic traffic. As the number of distributed energy resources increases, household power will become more variable and thus unpredictable from the viewpoint of the distribution system operator (DSO). Therefore, it is expected that in the near future there will be an increase in the number of wide area measurement system (WAMS) devices with phasor measurement unit (PMU)-like capabilities in the distribution grid, thus allowing utilities to monitor the low voltage grid quality while providing information required for tighter grid control. From a communication standpoint, the traffic profile will change drastically toward higher data volumes and higher rates per device. In this paper we characterize the current traffic generated by smart electricity meters, and we discuss the potential traffic requirements resulting from the introduction of enhanced smart meters, i.e. meters with PMUlike capabilities. Our study shows how GSM/ GPRS and LTE cellular system performance behaves with current generation and next generation smart meter traffic, where it is clearly seen that the PMU data will seriously challenge these wireless systems. We conclude by highlighting the possible solutions for upgrading the cellular standards, in order to cope with the upcoming smart metering traffic.