Study of surface passivation and contact deposition techniques in CdZnTe X-Ray and gamma-ray detectors

Passivation and improved contact deposition techniques are known to reduce the surface leakage current and decrease noise levels of CdZnTe X-Ray and gamrna-ray detectors by improving their spectral energy resolutions. This paper presents a comparative study of surface passivation process in CdZnTe X-Ray and gamma-ray detectors. The experimental study compares three surface passivation processes: mechanically polished with a O.9μm Alumina Powder (AI
₂
O
₃
) finishing; mechanically polished with a O.9μm Alumina Powder (AI
₂
O
₃
) and etched with HBr + H
₂
O
₂
solution for 2 minutes; mechanically polished with a O.9,.m Alumina Powder (AI
₂
O
₃
) and chemomechanically polished with bromine-methanol-ethylene glycol solution. The results show that chemo-mechanical polishing with bromine-methanol-ethylene glycol solution proved to be the best method out of the three for reducing surface leakage current. The preliminary results of aging studies on H
₂
O
₂
(Hydrogen Peroxide), NH4F (Ammonium Fluoride) + H
₂
O
₂
+ H
₂
O and (NH4hS (Ammonium Sulfide) passivation agents are also presented.