Loading [MathJax]/extensions/MathMenu.js
T–S Fuzzy Model-Based Robust Stabilization for Networked Control Systems With Probabilistic Sensor and Actuator Failure | IEEE Journals & Magazine | IEEE Xplore

T–S Fuzzy Model-Based Robust Stabilization for Networked Control Systems With Probabilistic Sensor and Actuator Failure


Abstract:

The system studied in this paper has four main features: 1) It is a networked controlled system (NCS), and therefore, the signal transfer is subject to random delay and/o...Show More

Abstract:

The system studied in this paper has four main features: 1) It is a networked controlled system (NCS), and therefore, the signal transfer is subject to random delay and/or loss; 2) it is a nonlinear system approximated by a Takegi--Sugeno (T-S) fuzzy model; 3) its multisensors and multiactuators are subject to various possible faults/failures; and 4) there are uncertainties in the plant model parameters. A comprehensive model is first developed in this paper to cover these features for a class of NCS nonlinear systems. This model has removed some limitations of similar models in the published literature. Then, the Lyapunov functional and the linear matrix inequality (LMI) are applied to develop two new stability conditions (Theorems 1 and 2). These conditions and an algorithm are used to design a controller to achieve robust mean square stability of the system. Finally, two examples are used to demonstrate the application of the modeling and the controller design method developed.
Published in: IEEE Transactions on Fuzzy Systems ( Volume: 19, Issue: 3, June 2011)
Page(s): 553 - 561
Date of Publication: 28 February 2011

ISSN Information:


Contact IEEE to Subscribe

References

References is not available for this document.