2 kV 4H-SiC DMOSFETs for low loss, high frequency switching applications

Due to the high critical field in 4H-SiC, the drain charge and switching loss densities in a SiC power device are approximately 10/spl times/ higher than that of a silicon device. However, for the same voltage and resistance ratings, the device area is much smaller for the 4H-SiC device. Therefore, the total drain charge and switching losses are much lower for the 4H-SiC power device. A 2.3 kV, 13.5 m/spl Omega/-cm/sup 2/ 4H-SiC power DMOSFET with a device area of 2.1 mm /spl times/ 2.1 mm has been demonstrated. The device showed a stable avalanche at a drain bias of 2.3 kV, and an on-current of 5 A with a VGS of 20 V and a VDS of 2.6 V. Approximately an order of magnitude lower parasitic capacitance values, as compared to those of commercially available silicon power MOSFETs, were measured for the 4H-SiC power DMOSFET. This suggests that the 4H-SiC DMOSFET can provide an order of magnitude improvement in switching performance in high speed switching applications.