Electronic scanning by ferrite-loaded corner reflector antennas

The measured performances of the antennas which consist of a
90\deg
corner reflector, a horn, a core wire of a coaxial line, two or three ferrite rods, and electromagnets magnetizing the respective ferrites are presented. The following are made clear for the antenna with two ferrite rods. The load of the ferrites yields the asymmetric power pattern owing to the anisotropy of the ferrites, though the antenna geometry and the magnetization of the ferrites are symmetric. Moreover, the remarkably sharper main lobe and the higher gain are obtained by loading the ferrites. The main lobe can be turned to the direction reflected about the symmetric plane of the antenna by reversing all the dc magnetic fields applied to the ferrites, that is, electronic lobe switching in the
H
-plane is realized. It is shown that the antenna loaded with three ferrite rods makes the continuous scan of the main lobe possible by applying the suitable magnetic fields to the ferrites. The direction of the main lobe of these antennas is turned by electronically changing the currents of the electromagnets, that is, by changing the tensor permeabilities of the ferrites. The reciprocity for antennas composed of isotropic media does not hold for these antennas. The receiving power pattern coincides with the transmitting pattern reflected about the symmetric plane when the same dc magnetic fields are applied for both cases. Hence, these antennas permit us to receive from a direction and simultaneously to transmit in the direction reflected about the symmetric plane.