Loading [a11y]/accessibility-menu.js
1118.1-1990 - IEEE Standard for Microcontroller System Serial Control Bus | IEEE Standard | IEEE Xplore

1118.1-1990 - IEEE Standard for Microcontroller System Serial Control Bus

Status: inactive - Withdrawn

Abstract:

A serial control bus for interdevicehtrabuilding as well as intrasite interconnection of microcontrollers is described. The bus, which is defined for (but not limited to)...Show More
Scope:This standard describes a serial control bus for interdevice/intrabuilding interconnection of microcontrollers. Intrasite interconnection is also provided.This standard, ...Show More
Purpose:This standard defines an interconnect bus for (but not limitedto) microcontrollers and devices with limited reprogrammability. This bus provides amulti-drop bit-serial co...Show More

Abstract:

A serial control bus for interdevicehtrabuilding as well as intrasite interconnection of microcontrollers is described. The bus, which is defined for (but not limited to) microcontrollers and devices with limited reprogrammability, provides a multidrop bit-serial communication protocol that will allow the interconnection of distributed Independently manufactured devices. The protocol is optimized for instrumentation, distributed data acquisition systems, control devices, and test and measurement. Specifications for a common architecture, generic bus services, system wagement, data link, and several physical media are provided.The serial control bus expands u...
Scope:
This standard describes a serial control bus for interdevice/intrabuilding interconnection of microcontrollers. Intrasite interconnection is also provided.This standard, which focuses on OS1 layers 1,2, and 7, may be used with other standardsand practices to effect total solutions to specific applications.
Purpose:
This standard defines an interconnect bus for (but not limitedto) microcontrollers and devices with limited reprogrammability. This bus provides amulti-drop bit-serial communication protocol that will allow the interconnection of distributed,independently manufactured devices. The protocol is optimized for instrumentation,distributed data acquisition systems, control devices, and test and measurement.The purpose of Section 1 is to serve as the foundation for the standard. It contains theoverall definition of the bus network as well as a reference model for protocol sections.Protocol descriptions are contained in later sections of this document. This section ...
Date of Publication: 31 January 1991
Electronic ISBN:978-1-5593-7096-7
Persistent Link: https://ieeexplore.ieee.org/servlet/opac?punumber=2271

Subscription Options - Standards

References

References is not available for this document.