1. D. Maier-Schneider, J. Maibach and E. Obermeier
"A new analytical solution for the load-deflection of square membranes"
J. Microelectromech. Syst., vol. 4, pp. 238-241, 1995
2. H. E. Elgamel
"Closed-form expressions for the relationships between stress, diaphragm deflection, and resistance change with pressure in silicon piezoresistive pressure sensors"
Sens. Actuators A, Phys., vol. 50, no. 1–2, pp. 17-22, 1995
3. K. Balasubramanian and A. Cellatoglu
"An inductive pickup for pneumatic pressure transducer developed over thin metallic spherical diaphragm"
Proc. Int. Conf. Math. Comput. Sci., pp. 19-26, 2008
4. K. Balasubramanian and A. Cellatoglu
"Precision pneumatic pressure measurement with diaphragm based mechatronic devices"
Int. J. Electron., vol. 97, no. 1, pp. 45-62, 2010
5. K. Balasubramanian and A. Cellatoglu
"Exploiting the inflation characteristics of thin metallic spherical diaphragm for designing pneumatic pressure transducer"
Proc. Int. Conf. Digit. Factory, pp. 1828-1834, 2008
6. H. Camur and K. Balasubramanian
"Fluid pressure measurement while filling a rectangular cavity by a pressure cell of opto-electronic arrangement embedded on a diaphragm"
Proc. SPIE, vol. 4902, pp. 124-133, Nov., 2002
7. J. A. Voorthuyzen, A. J. Sprenkels, A. G. H. Van Der Donk, P. R. Scheeper and P. Bergveld
"Optimization of capactive microphone and pressure sensor performance by capacitor-electrode shaping"
Sens. Actuators A, Phys., vol. 26, no. 1–3, pp. 331-336, 1991
8. A. Cellatoglu and K. Balasubramanian
"LVDT pickup for improved sensitivity in diaphragm based high-pressure measuring mechatronic device"
Proc. Int. Conf. Converg. Sci., Eng. Educ. Res., a Global Perspect. New Millennium, pp. IT_1-IT_5, Apr., 2010
9. V. Liviu, C. Ioan, D. Mrcea and P. Seftimiuu
"Using an embedded microcontroller system to excite vibrating wire transducers"
Proc. 27th IEEE Int. Spring Seminar Electron. Technol., Meeting Challenges Electron. Technol. Progr., pp. 1-4, May, 2004, IEEE
10. K. Balasubramanian, K. Guven and Z. G. Altun
"Microprocessor based new technique for measuring pneumatic pressure using opto-coupler controlled vibrating wire transducer"
Proc. IEEE Instrum. Meas. Technol. Conf., pp. 464-467, May, 1994, IEEE
11. K. Balasubramanian, Z. G. Altun, K. Guven and T. Yalç
"A novel pneumatic pressure measuring device"
CU J. Faculty Engg. Arch, vol. 7, no. 2, pp. 65-74, 1992
12. K. Balasubramanian, Z. G. Altun and K. Guven
"A cantilever operated vibrating thin strip for sensing pneumatic pressure"
Proc. IEEE Instrum. Meas. Technol. Conf., pp. 139-143, Apr., 1995, IEEE
13. A. Cellatoglu and B. Karuppanan
"Vibrating cantilever transducer incorporated in dual diaphragms structure for sensing differential pneumatic pressure"
Int. J. Soft Comput., vol. 2, no. 4, pp. 95-109, Nov., 2011
14. A. Cellatoglu and K. Balasubramanian
"Pneumatic pressure cell with twin diaphragms embedding spherical corrugations in a dual diaphragm structure"
Int. J. Comput. Sci. Issues, vol. 1, no. 1, pp. 1-6, Nov., 2011
15. Catalogue
Apr., 2013, Stamford, CT USA, [online] Available: http://www.omega.com/Pressure/pdf/IP210.pdf
16. Advanced System Dynamics and Control; Review of First and Second Order System Response
Apr., 2013, [online] Available: http://web.mit.edu/2.151/www/Handouts/FirstSecondOrder.pdf