Development of the X-band RF power source for JLC

In this paper, we summarize our activities on X-band RF power source development for the Japan Linear Collider (JLC) project. First, we have designed and tested a solenoid-focused klystron at 11.424 GHz with a pulse length of 1.5 /spl mu/s and with an efficiency of 47%. A periodic permanent magnet (PPM) klystron, the first in that kind at KEK, is also under development. In parallel to this activity, another PPM klystron has been developed and remodeled in collaboration with BINP. Second, a new RF window with 100-MW power-handling capability has been designed and tested. It utilizes the TW mixed mode (TE11 and TM11 modes) to reduce the surface field at the brazing edge of the ceramic. The cold model test shows a low electric field at the brazing point as predicted by HFSS calculations. The high power model is now in manufacturing and the testing will start soon. Third, the Blumlein modulator was upgraded to produce a pulse with 2 /spl mu/s flat top and 200 ns rise time at 550 kV output voltage. Fourth, the multi-mode 2/spl times/2 DLDS (Delay Line Distribution System) pulse compression system has been designed, and its basic unit was manufactured and tested for proof of the principle. The measurement results show that the system works well with a high power distribution efficiency. The so-called mode stability experiment is also under preparation in the ATF linac tunnel in collaboration with SLAC. This experiment is aimed for examination of the stability of linearly polarized TE12 mode in a 55 m long waveguide, a key issue in the present configuration of multi-mode DLDS. Details of these developments and measurement results are presented.