Fixed Switching Frequency Hybrid Modulation With ZVS for Single-Phase Inverter

Soft switching technology is an effective way to reduce the switching loss of the single-phase inverter to improve efficiency. Because of the ease of implementing soft switching, inverter works in boundary conduction mode (BCM) is widely used. On the contrary, BCM causes wide variation in switching frequency and large inductor current ripple. In this article, a fixed switching frequency hybrid modulation method for the inverter is proposed, which can achieve zero-voltage switching without changing the switching frequency and reduce the peak value of inductor current. The modulation achieves good tracking of the output current with different loads by switching mode between the triangular mode and the trapezoidal mode accurately. For implementing modulation, the operation states of the inverter with different conditions are analyzed in detail, the number of operation states is deduced and the state machine about mode switching is summarized. In addition, a single-phase inverter prototype is designed to verify the feasibility and effectiveness of the proposed modulation. Compared with BCM, the efficiency of the inverter at both light load and full load is increased.