A High-Precision Sensor Based on AC Flux Cancellation for DC Bias Detection in Dual Active Bridge Converters

DC bias in a transformer is a threat to the safe and efficient operation of dual active bridge (DAB) converters. Detecting a dc component in milliamperes mixed with a large ac current is difficult. This article proposes a current sensor based on ac magnetic flux (MF) cancellation. The proposed sensor utilizes a current transformer (CT) to extract the ac component in the measured current. Then, a power op-amp copies the CT signal to an additional winding to generate an ac MF opposite to that of the main ac current. Hence, the sensor range required to measure the dc is greatly reduced for a much smaller absolute measurement error. Using only a CT and a simple op-amp circuit, the proposed solution features low complexity and power consumption. The relative error in a range of 15-A ac current is 0.038%, showing a five-fold improvement compared to off-the-shelf sensors. The proposed sensor is verified on a 1-kW DAB prototype, where the dc bias is suppressed to nearly null owing to the proposed sensor.