Enhanced-Stopband Dual-Polarized Filtenna Without Extra Circuit for Tile Array Applications

In this communication, a dual polarized (DP) stacked patch filtenna (filtering antenna) with a wide stopband is developed for tile array applications. The bandpass filtering property is realized by improving the feeding network and patch without adding extra bandpass circuit or size. An elaborate feeding structure with complementary pair of a short-circuited stub and an open-circuited stub (CSSOS) is developed, which generates two transmission nulls effectively enhancing the selectivity and suppressing the harmonic. Moreover, CSSOS has a small size and broadens the impedance bandwidth apparently by introducing an in-band resonance. By properly etching four U-shaped slots on the driven patch, a radiation null in the upper stopband is also generated. The nulls generated by the two approaches can be adjusted independently in wide ranges. For further harmonic suppression, bandstop striplines (BSSs) with ultralow insertion loss are developed. Measured results show that the filtenna performs a wide operating band (3.10–3.95 GHz) and a wide stopband up to 8 GHz with a rejection level higher than 16 dB. Besides, a 32-element tile phased array employing the filtennas is also fabricated and measured. A compact configuration, high selectivity, and good beam steering capacity are exhibited.