Broadband Chiral-Type Linear to Linear Reflecting Polarizer With Minimal Bandwidth Reduction at Higher Oblique Angles for Satellite Applications

This work presents a broadband linear–cross polarizer for K- and Ka-band applications. The design consists of a simple asymmetric width-based meander-line metasurface printed on a thin FR-4 grounded dielectric substrate. Normal incidence demonstrates 90% polarization conversion ratio (PCR) bandwidth (BW) of 20.64 GHz from 18.31 to 38.95 GHz with 72.1% fractional BW (FBW). Due to the destructive interference involved at greater oblique angles, reflective polarizers experience severe degradation of 90% PCR BW response. The proposed polarizer’s performance is obliquely stable up to 43° for transverse electric (TE) and 45° for transverse magnetic (TM) incidence with minimal 90% PCR BW reduction of only 13.95% (TE) and 15.25% (TM) compared with normal incidence. For the first time, transfer matrix method (TMM)-based equivalent surface impedance technique is modeled for oblique incidence analytically, closely resembling the full-wave analysis. The design is compact with a periodicity of
$\lambda \text{o}$
/5.98 and a thickness of
$\lambda \text{o}$
/13.69. The surface current patterns at resonant frequencies illustrate the reason behind broadband behavior. Bistatic radar cross section (RCS) analysis of the proposed converter is studied with reference to PEC. To the best of the author’s knowledge, this structure demonstrates broadband response with wide angular stability with less than 90% PCR BW reduction at higher oblique angles reported so far.