Research on Master–Slave Windings Motor Drive System and Control Strategy

To improve the torque performance limited by the low carrier ratio operation in motor drive system, a master–slave motor drive system based on dual stator winding structure is researched in this article. A high-frequency harmonic current is injected through the auxiliary windings to compensate the torque ripple and dynamic issue caused by the low carrier ratio. The basic operation principle in master–slave motor drive system is presented and then the turn ratio, mutual inductance, and carrier ratio in both windings are studied to achieve the optimization for the torque performance and power loss. The control method aiming at depression on toque ripple and load disturbance is proposed and gets merged with the vector control strategy. The loss analysis considering the injected high-frequency current is presented to compare with the three-phase system in high carrier ratio operation. It is found that a 30% total loss reduction can be achieved under the same torque ripple. Both simulation and experiments show the effectiveness of proposed master–slave windings system and the control strategy.