A Soft-Switched Power-Factor-Corrected Single-Phase Bidirectional AC–DC Wireless Power Transfer Converter With an Integrated Power Stage

Bidirectional ac–dc wireless power transfer (WPT) converters are widely used in grid-connected electric vehicle systems for grid-to-vehicle and vehicle-to-grid applications. They usually apply a two-stage topology with a bidirectional ac–dc power factor correction converter and a bidirectional dc–dc WPT converter. Such a two-stage topology cannot achieve high efficiency and low cost. Recently, single-stage matrix bidirectional ac–dc WPT converters have been proposed. However, the matrix-converter-based topologies do not utilize remarkably lower count of power switches and generate large double-line frequency ripple in the dc-side voltage or current. This article proposes a new single-phase bidirectional ac–dc WPT topology with an integrated power stage to overcome the drawbacks of the matrix-converter-based topologies and retain the advantages of single-stage topologies. Description of the proposed topology with the modulation and control methods, theoretical analysis, and reference design procedure are presented in detail. Finally, a scaled-down laboratory prototype with 500-W output power is implemented with experimental results presented to validate the principle, analysis, and design.