Highly Efficient Wideband GaN MMIC Doherty Power Amplifier Considering the Output Capacitor Influence of the Peaking Transistor in Class-C Operation

In this paper, a highly efficient gallium nitride (GaN) monolithic microwave integrated circuit (MMIC) Doherty power amplifier (DPA) from 4.6 to 5.5 GHz with the consideration of the influence of the peaking transistor’s output capacitor
$(C_{\mathrm {out}}$
) operated in Class-C state is presented. Based on the load-modulation behavior analysis, the effect of the
$C_{\mathrm {out}}$
of the peaking transistor on the performance of the wideband DPA has been theoretically analyzed for the first time by directly evaluating the value of the peaking transistor’s
$C_{\mathrm {out}}$
. A hybrid matching technique has been proposed to ensure that the DPA can realize a proper load-modulation with high back-off efficiency in a wide bandwidth. In this method, the peaking transistor is matched using a simple T-shape band-pass type network with the
$C_{\mathrm {out}}$
of the peaking transistor in Class-C operation state compensated properly, while the carrier transistor is matched using a 2-point matching method. For verification, a wideband GaN MMIC DPA with the frequency range of 4.6 to 5.5 GHz was designed using a 0.25-
$\mu {\mathrm{ m}}$
GaN on silicon-carbon high-electron-mobility transistor process. Experimental results show that the fabricated DPA can realize the output power of 41.1-41.6 dBm and the drain efficiency (DE) of 57.6%-63.3% at saturation in the whole frequency band. The measured DE at 6-dB power back-off is 51%-56.4%. Good linearity with high average efficiency performance was obtained when excited by a 160-MHz modulated signal after linearization.