A Power Adaptive Impedance Reshaping Strategy for Cascaded DC System With Buck-Type Constant Power Load

It is well-known that the low-frequency negative input impedance of the constant power load (CPL) is the major cause of the cascaded system instability, and the heavier the power, the worse the stability. In this article, a power adaptive load-side parallel virtual impedance (PALPVI) control strategy is proposed to improve the stability of the cascaded dc system with buck-type CPL. First, a parallel impedance with power adaptability is derived followed up with the derivation of the corresponding compensation controller transfer function to realize it virtually. Considering that the compensation controller is highly dependent on the circuit parameters and needs extra current sensors to acquire the power information, a simplification of the compensation controller is made based on the open-loop characteristics of the buck-type CPL. The final PALPVI control strategy does not require the circuit parameters or any current sensor and has almost no side effect on the dynamic performance. Finally, a 48–24–12 V cascaded dc system is fabricated to verify the feasibility and effectiveness of the proposed PALPVI control strategy.