A novel approach to high-level switching activity modeling with applications to low-power DSP system synthesis

We address high-level synthesis of low-power digital signal processing (DSP) systems by using efficient switching activity models. We present a technology-independent hierarchical scheme that can be easily integrated into current communications/DSP CAD tools for comparing the relative power/performance of two competing DSP designs without specific knowledge of transistor-level details. The basic building blocks considered for such systems are a full adder, a half adder, and a one-bit delay. Estimates of the switching activity at the output of these primitives are used to model the activity in more complex building blocks of DSP systems. The presented hierarchical method is very fast and simple. The accuracy of estimates obtained using the proposed approach is shown to be within 4% of the results obtained using extensive bit-level simulations. Our approach shows that the choice of multiplier/multiplicand is important when using array multipliers in a datapath. If the input signal with smaller mean square value is chosen as the multiplicand, almost 20% savings in switching activity can be achieved. This observation is verified by an analog simulation using a 16 /spl times/ 16 bit array multiplier implemented in a 0.6-/spl mu/ process with 3.3 V supply voltage.