Hardware- and software-based collective communication on the Quadrics network

The efficient implementation of collective communication patterns in a parallel machine is a challenging design effort, that requires the solution of many problems. In this paper we present an in-depth description of how the Quadrics network supports both hardware- and software-based collectives. We describe the main features of the two building blocks of this network, a network interface that can perform zero-copy user-level communication and a wormhole routing switch. We also focus our attention on the routing and flow control algorithms, deadlock avoidance and on how the processing nodes are integrated in a global, virtual shared memory. Experimental results conducted on 64-node AlphaServer cluster indicate that the time to complete the hardware-based barrier synchronization on the whole network is as low as 6 /spl mu/s, with very good scalability. Good latency and scalability are also achieved with the software-based synchronization, which takes about 15 /spl mu/s. With the broadcast, similar performance is achieved by the hardware- and software-based implementations, which can deliver messages of up to 256 bytes in 13 /spl mu/s and can get a sustained asymptotic bandwidth of 288 Mbytes/sec on all the nodes. The hardware-based barrier is almost insensitive to the network congestion, with 93% of the synchronizations taking less than 20 /spl mu/s when the network is flooded with a background traffic of unicast messages. On the other hand, the software-based implementation suffers from a significant performance degradation. With high load the hardware broadcast maintains a reasonably good latency, delivering messages up to 2KB in 200 /spl mu/s, while the software broadcast suffers from slightly higher latencies inherited from the synchronization mechanism. Both broadcast algorithms experience a significative performance degradation of the sustained bandwidth with large messages.