An All-Standard-Cell-Based Synthesizable SAR ADC With Nonlinearity-Compensated RDAC

We propose an all-standard-cell-based synthesizable successive-approximation-register analog-to-digital converter (SAR ADC) which is automatically placed and routed (P&R) using a commercial digital implementation tool. For higher feasibility and wider input range, a differential architecture is proposed with an inverter-based resistive digital-to-analog converter (RDAC) and a four-input comparator. MOSFET gate capacitance is employed for the sampling capacitor. To mitigate its capacitance variation due to input voltage and the leakage between gate and diffusion, we leave the diffusion of the standard cell floating and only use the capacitance between gate and bulk. Two prototypes have been designed in 65-nm bulk CMOS. Prototype I has been fabricated and achieves 10 MS/s, 14.3 mW, and 28.1-dB SNDR in a 6-bit architecture. The performance is improved in Prototype II by proposing a lookup table (LUT)-compensating transistor-configurable inverter-based RDAC and an OR-AND-Inverter (OAI)-based comparator and by employing a thick-oxide diffusion-floating decoupling cell for the sampling capacitor. The default LUT is created during the design phase by a script-controlled automatic simulation routine. The power consumption is significantly reduced as well through improved timing control. Layout-parasitic-extraction (LPE) simulations of Prototype II suggest 35.7- and 47.2-dB SNDRs in 6- and 8-bit versions, respectively. The power consumptions are reduced to 0.91 and 2.52 mW, respectively.