Design and Validation of a Self-Aligning Index Finger Exoskeleton for Post-Stroke Rehabilitation

Rehabilitation of hand functions is necessary to improve post-stroke patients’ quality of life. There is initial evidence that hand exoskeletons should exercise flexion/extension (f/e) and abduction/adduction (a/a) of the fingers to rebuild hand functions. However, designing a self-alignment mechanism of the metacarpophalangeal (MCP) joint to improve its wearing comfort is still a challenge. In this paper, a novel index finger exoskeleton with three motors is proposed to help post-stroke patients perform finger a/a and f/e training. A spatial mechanism with passive degrees of freedom for the MCP joint is designed to realize human-robot axes self-alignment. The proposed mechanism’s kinematic compatibility is analyzed to show its self-aligning capability, and the kineto-statics analysis is performed to present the exoskeleton’s static characteristics. Finally, kinematic and static experiments have been conducted, and the results indicate that the standardized reaction forces square sum of the exoskeleton to the MCP joint can be reduced by 65.8% compared with the state-of-the-art exoskeleton. According to the experimental results, the exoskeleton can achieve the a/a and f/e training and human-robot axes self-alignment, and improve its comfortability. In the future, clinical trials will be further studied to test the exoskeleton.