Open systems architecture solutions for military avionics testing

Raytheon makes extensive use of open systems architecture methods in developing special test equipment (STE) for testing military avionics equipment. Such use has resulted in significant cost and schedule savings in the development of production test equipment for radar and infrared systems. With open systems architectures, a test system can be assembled using COTS products. This brings economies of scale to test equipment, which is normally built in very low quantities. Therefore, the potential cost savings due to COTS usage is proportionately greater in STE than in the higher volume avionics systems that are tested. A second major benefit of using COTS products is that test system development schedule cycle time is greatly reduced. This paper describes the application of Open Systems Architectures (OSA) to avionics testing. The following major architectures are surveyed: VME bus, VXI bus, IEEE GPIB, IEEE 1149.1 JTAG test bus, 1553 Military Bus, Fibre Channel, and COTS Test Applications Software. We describe how the benefits of OSA have been extended at Raytheon into achieving vertical test commonalities. The flexibility of OSA can be exploited to provide an overall optimum test solution, taking all levels of test into account. For example, test systems can be tailored with COTS products to provide integrated methods for avionics tests at the module, unit, and system levels. Test systems can be configured to maximize the reuse of COTS hardware over all test levels. Test software can also be programmed to optimize such reuse over levels of test. Additional test verticality synergies derived from such OSA usage are described, including: test false alarm avoidance; test cones of tolerance optimization; and efficient test of field returns.