Transimpedance amplifier-based full low-frequency noise characterization setup for Si/SiGe HBTs

An experimental setup, based on current/voltage conversion through transimpedance amplifiers (TAs), has been implemented for the direct full low-frequency noise (LFN) characterization of Si/SiGe heterojunction bipolar transistors (HBTs) in terms of base and collector short-circuit current noise sources. This setup performs a full characterization, as it measures simultaneously the two noise current sources and their correlation, thanks to an original technique based on the specific properties of a specially designed buffer amplifier using a low-noise common-base bipolar transistor (CB BJT). By means of translation formulae, the obtained measurements are compared with those carried out with a multi-impedance technique. They show a good agreement both for the noise sources spectral densities and for their correlation. The TA-based setup provides enhanced capabilities in terms of measurement speed and remote control potentialities.