DC is the Future [Point of View]

For ac electricity grids, the aim has always been at low-cost and disruption-proof solutions. The power grid is inherently vulnerable to environmental disturbances. However, the introduction of power electronics (PEs) and changes in load and generator characteristics have introduced a game changer at an unprecedented pace over the last decade. During this change, load specifications, load characteristics, and control and monitoring requirements for power system security have also dramatically evolved. Efficiency and reliability of system components have progressed in parallel with this evolution. However, high penetration of renewable energy sources has reduced the percentage contribution of conventional electricity based on synchronous generation, which affects grid stability and hence reliability. Furthermore, numerous camouflaged dc generators and dc loads are being embedded in ac and dc microgrids at ever increasing rates. While embedded generation rapidly increases its share in the hybrid power grid (where ac and dc coexist), the current developments in PE switches-based on wide bandgap (WBG) technology-indicate that within the next two decades Max Planck's well-known sentiment that science advances one funeral at a time will repeat itself on the ac grid. This article aims to summarize the technical developments and problems facing the utilization of ac during widescale electrification of the world using numerous distributed energy resources (DERs). Then, it will map out evolutionary changes toward a future dc grid.