Performance Investigation on a Novel High Inductance Changing Ratio MMC-Based Direct Current System Saturated Core FCL

Large fault direct current with fast rising speed has always been a significant threat to high voltage direct current systems. Fault current limiters (FCLs) are one of the most promising solutions. However, the biased permanent magnets (PM)s in traditional FCLs have large magnetic reluctance that causes FCLs to have small inductance changing ratios when a fault occurs. In this study, a novel three-limb topology of a saturated iron core-type fault current limiter (TSFCL) is proposed and a central PM bias limb is inserted to force flux flow through this limb. Therefore, the inductance changing ratio is greatly enhanced and the steep rising trend of fault current will be restrained effectively. The operating principles and characteristics of the TSFCL are analyzed to verify the deductions. Moreover, different lengths and cross-sectional areas of the inserted PM are tested and optimization study is carried out. The results show that the clipping inductance has a 55% increase compared with a traditional two-limb model. Moreover, compared with the existing smoothing reactor and traditional two-limb model, proposed topology can decrease the fault current by 45% and 16% within 5 ms, respectively. Finally, a typical HVDC system was built and the effectiveness of proposed TSFCL was verified.