Voltage Autobalance Characteristic Analysis and Clamp Circuits Design of Hybrid-Clamped Three-Level LLC Converter

The operating principle of the clamp circuits like clamping diodes and flying capacitor in three-level LLC converter is different from other three-level converters, because the mean value of the resonant tank current is always zero and pulse-frequency modulation control is generally used instead of pulsewidth modulation control. And the converter with only the clamping diodes or flying capacitor is difficult to realize voltage balance. In this paper, the characteristics of the three-level LLC converter with single clamp circuit are first analyzed. Then, the operation principle of the hybrid-clamped circuit under the unbalanced voltages on input capacitors is described with the mode analysis, based on which the mechanism for voltage autobalance is elaborated and the effects of two clamp circuits are derived. Then, the design of the clamping diodes and the flying capacitor is also involved. Finally, a three-level LLC converter prototype is built and the experimental results verify the validity of the theoretical analysis and design.