A Hardware-in-the-Loop Realization of Speed Sensorless Control of PMa-SynRM With Steady-State and Transient Performances Enhancement

This paper presents the design and implementation of a novel low-cost speed sensorless control technique for a permanent magnet assisted synchronous reluctance motor (PMa-SynRM). A robust adaptive speed (RAS) observer is designed for estimating the rotor speed and position, respectively. The RAS observer estimates the PMa-SynRM speed and position from the back electromotive force space-vector determination without voltage sensors by using the reference voltages issued from the current controllers instead of the actual ones. The novelty of the proposed RAS estimation technique is the adaptation of the feedback error of the actual values. Thus, the proposed observer structure promises a higher degree of robustness against PMa-SynRM parameter changes in the sensitivity analysis presented in this paper. The dynamic model and experimental realizations of the proposed control technique are introduced. A 6-kW PMa-SynRM drive test setup is constructed including a dSPACE 1104 board as the control heart of the proposed system. The hardware-in-the-loop Typhoon HIL 402 device is used to experimentally emulate the PMa-SynRM and the inverter connected to a dSPACE MicroLabBox. The proposed RAS observer robustness is evaluated using a HIL model and experimental results under different conditions. A comparative experimental analysis between the proposed RAS and Luenberger observers has been performed.