Offset dual-shaped reflectors for dual chamber compact ranges

The application of the theory of the synthesis of offset dual-shaped reflectors to the design of compact ranges is examined. The object of the compact range is to provide a uniform plane wave with minimum amplitude and phase ripple over as large a volume as possible for a given size reflector. Ripple can be lowered by reducing the edge diffraction from the reflector producing the plane wave. This has been done either by serrating or rolling the edge. An alternative approach is to use dual offset-shaped reflector synthesis techniques to produce a reflector aperture distribution that is uniform over most of the aperture, but with a Gaussian taper near the edge. This approach can be used together with rolling and/or serration if desirable. The amount of phase and amplitude ripple obtained with two different dual-shaped reflector designs is studied as a function of position in the plane wave zone and reflector size in wavelengths. The amount of both transverse and longitudinal (z-component) cross polarization is studied.<
>