Implementation of a three-level rectifier for power factor correction

In this paper, a new single-phase switching mode rectifier (SMR) for three-level pulse width modulation (PWM) is proposed to achieve high input power factor, low current harmonics, low total harmonic distortion (THD) and simple control scheme. The mains circuit of the proposed SMR consists of six power switches, one boost inductor, and two DC capacitors. The control algorithm is based on a look-up table. There are five control signals in the input of the look-up table. These control signals are used to control the power flow of the adopted rectifier, compensate the capacitor voltages for the balance problem, draw a sinusoidal line current with nearly unity power factor, and generate a three-level PWM pattern on the AC side of adopted rectifier. The advantages of using three-level PWM scheme compared with two-level PWM scheme are using low voltage stress of power switches, decreasing input current harmonics, and reducing the conduction losses. The performances of the proposed multilevel SMR are measured and shown in this paper. The high power factor and low harmonic currents at the input of the rectifier are verified by software simulations and experimental results from a laboratory prototype.