Design of a vehicular antenna for GPS/Iridium using a genetic algorithm

In this paper, we describe a vehicular wire antenna, designed using a genetic algorithm that may be used for both the GPS and Iridium systems. It has right-hand circular polarization, near hemispherical coverage, and operates over the frequency band from 1225 to 1625 MHz. This antenna was simulated using the numerical electromagnetics code (NEC) and then fabricated and tested. The antenna consists of five copper tubing segments connected in series, has an unusually odd shape, and is very inexpensive. It fits in a volume approximately 10 cm/spl times/10 cm/spl times/15 cm, The input voltage standing wave ratio (VSWR) and circular polarization radiation patterns were computed and measured. The VSWR was under 2.2 at the design frequencies of 1225, 1575, and 1625 MHz. The gain varied by less than 12 dB for a 170/spl deg/ sector; it generally fell off near the horizon so the variation was less for 150/spl deg/ and 160/spl deg/ sectors. This new design process, which uses a genetic algorithm in conjunction with an electromagnetics code, produces configurations that are unique and seem to outperform more conventional designs.