Observing Bubble Cavitation by Back-Propagation of Acoustic Emission Signals

Temporal- and spatial-resolved observations of microbubble cavitation generated through high-intensity ultrasound irradiation are key in improving both the efficiency and efficacy of ultrasound-assisted drug delivery systems. A method of measuring bubble cavitation applying an image-reconstruction technique of back-propagation of an acoustic cavitation emission (ACE) signal is proposed. A high-intensity focused ultrasound wave (pump wave) irradiates the bubble synchronously using ultrasound recording equipment to acquire the timing of the RF signal, which is produced when the bubble radiates a secondary wave during bubble cavitation. The ACE signal source is reconstructed through ultrasound-wave back-propagation followed by amplitude deconvolution. The proposed method was applied to microbubbles of an ultrasound contrast agent by changing the sound pressure of the pump wave. The method reliability of the temporal resolution was verified by simulating the amplitude-modulated signal of the virtual sound source. The temporal transition of the ACE signal exhibited sub-microsecond-order fluctuations in the signal intensity. From the amplitude signal image and the instantaneous frequency image reconstruction of the proposed method, two different ACE phenomena were visualized. One is the periodic pattern by the beat signals from the harmonic and ultraharmonic component of nonlinear oscillation under low-intensity ultrasound conditions. The other is the nonperiodic temporal and spatial distributions of this irradiation under high-intensity ultrasound conditions.