Longitudinal feedback system kicker for the PLS storage ring

The higher order modes (HOMs) of RF cavities at the Pohang Light Source (PLS) storage ring cause longitudinal coupled bunch mode instabilities. A longitudinal feedback system (LFS) is introduced to cure these instabilities. As a key component of the LFS, there is a single-ridged waveguide-overloaded cavity for a longitudinal bunch-by-bunch LFS kicker. Since the RF frequency is 500 MHz, the bandwidth of this kicker should be wider than 250 MHz to damp any coupled bunch mode. Also, a higher shunt impedance of the kicker is selected to use a lower power amplifier. One aluminum kicker is fabricated, and the bandwidth, HOMs, and the shunt impedance of the kicker are measured with a network analyzer. This kicker has several different features from the LFS kicker for DA/spl Phi/NE. First of all, there are four input/output ports to obtain a wider bandwidth. Second, there is a nose cone to obtain a higher shunt impedance. Third, the symmetric frequency response of the shunt impedance around the central frequency is provided. Finally, low beam coupling power (4 W per port at 400 mA) is obtained. According to the simulation result by the high frequency structure simulator (HFSS) code, we obtained the high shunt impedance of 621.3 /spl Omega/ (transit time factor considered value) and the wide bandwidth of 255 MHz. These are compared with the measured result.