Considerations for SAR image quantification unique to orbital systems

A discussion is presented of quantitative expressions required for the response of a synthetic aperture radar (SAR) to both point and distributed scatterers for purposes such as calibration and polarimetry. Image gains depend on the viewing geometry, which is unlike the flat Earth case, which often is assumed to apply in an orbital geometry. Image signal-to-noise ratio is dependent on footprint velocity, but the mean clutter-to-noise ratio for distributed scatterers is dependent on spacecraft velocity. When imagery of a distributed scene observed by an orbital SAR is to be calibrated by comparison to the impulse response of a reference point scatterer, for example, the velocity ratio enters the expression for peak power, but does not enter when an integral is used over the impulse response. The author also looks at the processing gain resulting from overlapping image pixels in azimuth through sampling of the pulse repetition frequency.<
>