Development of a Digital Quench Detection System for Nb3Sn Magnets and First Measurements on Prototype Magnets

The High Luminosity upgrade for the Large Hadron Collider LHC (HL-LHC) requires new Nb
₃
Sn superconducting magnets and it triggers a development of novel hardware for the quench detection system (QDS) based on a field programmable gate array (FPGA) digital platform and a number of individually isolated analogue front-ends. Galvanic insulation has been implemented downstream the analogue to digital convertors to eliminate a usage of analogue isolation amplifiers. This concept was already successfully implemented in the current LHC QDS system, however the mitigation of new phenomena inside Nb
₃
Sn materials required development of a new generation of QDS. The newly developed universal QDS offers flexibility of firmware defined architecture. Adopted prototype driven strategy includes thorough characterization of the analogue front-ends in the laboratory and prototype unit measurements performed on HL-LHC magnet prototypes at CERN's superconducting magnet test facility SM18. The tests also reveal the characteristics of the magnets as well as the measurement electronics at an early stage. The test results are used to optimize the analogue input stages as well as the digital signal processing within the FPGA. The preliminary test results are presented and focus is given to the measurement and studies of the so-called “flux jumps” to mitigate the effects of these voltage perturbations in the QDS.