Broad wavelength generation and conversion with multi modal Four Wave Mixing in silicon waveguides

The possibility to perform broad wavelength generation and conversion is of great interest in classical and quantum optics. With the introduction of integrated nonlinear silicon photonics, these tasks have been made even more viable thanks to the combination of the high nonlinear refractive index of silicon with the high confinement provided by the photonic waveguides. Exploiting this platform, several solutions for wavelength conversion have been investigated, for both optical processing [1] and applications in the Mid Infrared (MIR) [2]. The possibility to perform broad and controllable wavelength generation can be exploited also for creating integrated sources of quantum states of light based on single photons [3] or correlated photon pairs [4]. Both the generation and conversion can be accomplished by means of Four Wave Mixing (FWM). FWM is a nonlinear optical process in which two pump photons at frequency are converted into signal and idler photons at frequencies and ω/ respectively (with ω
I
/ω
S
). In the particular case of wavelength conversion, FWM is stimulated by a seed wave at the same wavelength of the signal (idler) that will be converted to the wavelength of the idler (signal). FWM has to satisfy the energy conservation, according to which the relation ω
P
+ ω
P
= ω
S
+ ω
I
holds, and its efficiency is ruled by the phase matching condition. This latter condition is related to the phase mismatch among the waves involved in the FWM process, that is evaluated as Δk = k
p
+ k
p
−k
S
−k
I
, where k
P
, k
S
, k
I
are the wavevectors for the pump, the signal and the idler, respectively. When Δk = 0, the phase matching condition is fulfilled and the efficiency of FWM is maximized. What is important for wavelength generation and conversion is the spectral position of the phase matching condition, which determines the wavelength at which the maximum efficiency of the conversion or generation process is achieved. Because of this, techniques for the control of the phase matching condition have been developed, focusing on the possibility to tailor the Group Velocity Dispersion (GVD) through a proper engineering of the waveguide geometry [5]. While these techniques consider only the first order waveguide mode, here we propose to exploit the higher order modes propagating inside a multimode waveguide. The dispersion of the higher order modes can be used to tune the spectral position of the phase matching condition for the FWM process, achieving controllable and large spectral translation in both Stimulated Four Wave Mixing (sFWM) and Spontaneous Four Wave Mixing (SFWM).